Chain Breaker/Riveting Tool

[BWG950S]

Does anyone know if and where there is a Chain Breaker/Riveting Tool for 525 Chains available in Thailand?

I have new sprockets and chain but no tool to change the change. :cry

 

[bigntall]

Jim - I've seen it done with a screw small screw driver slowly and gently prying off the riveted plate, then the new master link installed using two hammers, one as an anvil the other as the pounding device. not as comforting as a proper tool but it has worked.

 

[bigntall]

Shit, just realized your talking about drive chains and not KTM 525 timing chains.

 

[KTMphil]

Jim

I've got the Motion Pro mini chain breaking & press tool set, it's a quality piece of gear.

http://www.motionpro.com/motorcycle/partno/08-0358/

Light Weight Chain Breaker and Chain Press Tool

For breaking 520 to 530 chain
For pressing on and off 520 and some 525 clip type master link side plates
Includes 1/4 in. drive adapter for turning sockets
Light weight, 6 oz. including press plates and handle (8 oz. with pouch)
Will push link pin completely through link/side plate
Handle detaches for easy storage. To reduce the weight even more an MP Tool (08-0161), 8 mm combination wrench or an 8 mm socket with extension can be used as the handle
Custom pouch holds tool securely and includes pocket for extra chain or master links and a large accessory pocket
Body forged from high-strength 4130 chrome-moly
Body bolt and extractor bolt manufactured from billet high-strength 7075 T-6 aluminum
Replaceable pin is heat treated for strength and wear resistance
Press plates manufactured from light weight 6061 T-6 aluminum
Perfect addition for tool packs
For use on clip type master links with press fit side plates only
Does not rivet master link or chain pins

 

[BWG950S]

Jim

I've got the Motion Pro mini chain breaking & press tool set, it's a quality piece of gear.

http://www.motionpro.com/motorcycle/partno/08-0358/

Light Weight Chain Breaker and Chain Press Tool

For breaking 520 to 530 chain
For pressing on and off 520 and some 525 clip type master link side plates
Includes 1/4 in. drive adapter for turning sockets
Light weight, 6 oz. including press plates and handle (8 oz. with pouch)
Will push link pin completely through link/side plate
Handle detaches for easy storage. To reduce the weight even more an MP Tool (08-0161), 8 mm combination wrench or an 8 mm socket with extension can be used as the handle
Custom pouch holds tool securely and includes pocket for extra chain or master links and a large accessory pocket
Body forged from high-strength 4130 chrome-moly
Body bolt and extractor bolt manufactured from billet high-strength 7075 T-6 aluminum
Replaceable pin is heat treated for strength and wear resistance
Press plates manufactured from light weight 6061 T-6 aluminum
Perfect addition for tool packs
For use on clip type master links with press fit side plates only
Does not rivet master link or chain pins

That is a nice looking piece of kit there Phil.

Do you know if there are any shops stocking it in Bangkok?

 

[KTMphil]

Dirt Shop in Bangkok stocks Motion Pro gear, but pricey - you might be better off ordering one from the USA.

 

[Loop]

These are the sort of tool i`ve always used..

Surely someone in Chiang Mai sells something like it?

 

[Captain_Slash]

These are the sort of tool i`ve always used..

Surely someone in Chiang Mai sells something like it?

I use one of them, they do the job well enough for me

 

[BWG950S]

I just received an e-mail from Terra - X that they made a small run of their Chain Breaker and only 30 pieces will be available.


http://terra-x.com.au/chain-breaker/